10 responses so far ↓

• 1 Olivarez

  Our HP 42 inch LCD Media Smart TV was installed using the “MountsPro Tilting Articulating Arm Universa LCD/Plasma Wall Mount Bracket. We used it inside an Armoire and we are 100% PLUS HAPPY with this mount. At C.C chain store it was, and I kid not, $500.br /br /Thia arm is well made, easy to use and smooth operating at any confrigulation. I had a friend install it and he had no problems. I can not review a wall mount at this time but we plan to move and will purchase another MountsPro by CHEETAH MOUNTS.br /br /Thank you Cheetah for the great product at a great value.

• 2 Prichard

  I just finished installing this mount and my 50″ Panasonic plasma. I bought the articulating mount so I could position the TV in the corner. This means I mounted it towards the corner of one wall and used the articulation to move it to a diagonal position where the edges are flush against adjacent walls. br /br /This mount was very easy to install. Instructions were great. I really liked the built-in level. It was easy to get the plasma on the mount with two people. br /br /The one issue I had was with the tv actually being level. The tv is level when it’s flat against the wall. When I articulate it out a bit and to the right, the right edge dips. It’s obvious enough to bother me. What I did was adjust one of the brackets that bolt to the tv. I purposely had one bracket one position different (higher) than the other. This resulted in leveling the tv when articulated. However, when I put the tv back against one wall, it’s grossly off level. That’s ok for me because the permanent spot is in the corner which is level. I think the problem is due to the weight pressing down on the arm. Not much you can do about it.

• 3 Parmenter

  I just installed this wall mount for use with a 42″ Philips plasma screen TV. As you can see from the picture, the mount basically consists of two plates connected by an articulating arm, which provides the swivel action. The TV is secured to the larger of the two plates via the supplied brackets, which provide the tilt action. The mount itself comes pre-assembled and thus requires only installation onto the wall; similarly, the brackets are also pre-assembled (with the exception of a pair of adjustment knobs for the tilt mechanism which for some reason are not mentioned at all in the installation instructions), and need only be screwed into the back of the TV.br /br /Despite some headaches presented by the construction of my wall (I rent an apartment in an old building in Brooklyn where there is apparently an inch-and-a-half of plaster overlying drywall and studs), I was able to install the smaller plate into the wall using some cheap-but-sturdy toggler anchors from the local hardware store, without a problem.br /br /Where I did run into a problem was when I mounted the TV to the larger of the two plates. Basically, though the mount seems solidly constructed and holds up just fine, it seems as though the articulating arm isn’t strong enough at the joint, which causes a distinct and noticeable (about 3-5 degrees or so) right-sided droop to the TV; this despite the fact that the smaller plate affixed to the wall is perfectly level. Now, given that the mount is rated for TVs up to 55″, I don’t think my 42″ TV is outside of its reported weight range. So, given that the wall plate is level, and eliminating the weight of the TV as the source of the problem, I can only chalk it up to a design or manufacturing defect.br /br /Now, the droop makes the whole thing look kind of sloppy, though in truth it doesn’t really affect the viewing experience all that much; it’s slight enough so that you don’t notice it at all once you’re engrossed in whatever it is you’re watching. And this is definitely the cheapest tilt-and-swivel mount I’ve been able to find, which offsets a little bit of my disappointment. In sum, I’d say I’m satisfied enough that I won’t bother to go through the hassle of trying to return it, but if I were to do it all over again I might have saved up for a slightly more expensive model from a different manufacturer.

• 4 Chopra

  This was much easier to install than I had feared, having read lots of reviews of wall mount products being difficult to install. Two of us installed in less than 1/2 hour. It even has a level built into the product so you can see immediately if the mount is level or not as you screw it into the wall.br /It holds my TV perfectly level and is easy to move about.

• 5 Reisbeck

  This mount is sturdy and well built. It was easy to install into my traditional TV cabinet. br /br /The mount adjusts in several different ways, allowing for easy mounting of my Panasonic Viera, which I was told would not be easy to find a mount for as it does not have standard mount holes.br /br /The only trouble I have has was my error, where I did not attach the mount to the cabinet perfectly vertical. Now when the arm is completely extended and the TV is turned its not level. Not really a big deal as I only have it in that position when fiddling with cables.br /br /Overall I’m very happy.

• 6 Pierce

  If you’ve ever mounted a TV before, you know drilling those screws into the stud can be an absolute pain.. pushing hard and risking stripping the screws. This mount had a great system. After you drill the pilot holes, use a socket wrench to install and tighten the screws. Amazingly simple and hassle free. Love it. Yeah watch the levels they are not accurate. Use your own. What a deal for so cheap. The tilt works as designed as well.

• 7 Tellis

  I had the TV hanging in about 10 mins. Very easy to figure out and it comes with all the mounting hardware.

• 8 Rubschlager

  The price on this TV wall mount was too good to pass up, but it is not very sturdy! This mount is barley capable of supporting a 50″ plasma. I am using it now for 4 months, but I worried about it the 1st week. So far it is still holding.

• 9 Islas

  It took about five days to receive this product and I only got the metal pieces. I called the company and they shipped the mounting hardware in two days and emailed me installation instructions immediately. I didn’t have to sit on hold forever and they were very friendly and helpful. We used this to hold a 42″ Samsung and so far so good! Oh and like everyone else has also said, don’t use the level because it’s definitely not accurate.

• 10 Reggy

  This is my second wall mount that I own and in comparison to the first the quality of the material is definitely not as good. Everything necessary to mount it on the wall was included but I wouldn’t suggest using the included level as it was way off compared to a legitimate one. Overall, for the price it is a good value for a secondary set. I don’t think I would use it for my primary set or one larger than 42″.

You must log in to post a comment.